The Running Belt Of Ordinary Household Electric Treadmill Is Adjusted For Tightness And Deviation!

All Treadmill need to adjust the running belt before leaving the factory and after installation, but it may still appear slack after a period of use. For example, there is a phenomenon of users pausing and slipping while running. When this phenomenon occurs, adjust the running belt adjustment bolt in a clockwise direction with half a turn as a unit, and synchronize it left and right. If the running belt needs to be tightened, the opposite should be done in a counterclockwise direction. If the running belt is too loose and the foot is on the running belt, the running belt and drum will slip. However, if it is too tight, it is not good and can easily increase the load on the motor, damage the motor, running belt and drum, etc.

Running belt alignment
1. Place the electric Treadmill on the flat ground.
2. Use an electric Treadmill to run at a speed of about 3.5 km/h.
3. If the running belt leans to the left, rotate the left adjusting bolt clockwise by 1/2 turn, and then rotate the right adjusting bolt counterclockwise by 1/2 turn
4. If the running belt leans to the right, rotate the adjusting bolt on the right clockwise by 1/2 turn, and then rotate the adjusting bolt on the left counterclockwise by 1/2 turn